Description

Kartell Desiccator, Polycarbonate, fits 5.55″ (141mm) plate.

Unbreakable plastic desiccator cabinets
Polypropylene base and plates
Implosion proof
Polycarbonate cover takes 8-10mm tubing

Kartell® polycarbonate desiccators and plates are available in three sizes and ready for immediate shipment. Desiccator will take a vacuum of -740 mm Hg with loss (absolute zero: -760 mm/HG) not exceeding 20 mm Hg in 24 hours. The transparent polycarbonate cover seals onto a neoprene O-Ring set into the flange of the PP base. A little grease spread on the O-Ring will assist in establishing initial vacuum.

Within the desiccator is a removable pan for holding a drying agent. Vacuum release tap/non return valve assembly is included. A grooved stopper allows air to be re-admitted very slowly when required in order to avoid disturbing the contents.

Usage Instructions:
1. remove the cover in PC – insert the samples in the pan
2. open the vacuum retention valve (PE needle) connect the tube of the pump to the desiccator spigot in order to create vacuum
3. close the vacuum retention valve

	DL-243025	DL-243045	DL-243065
Volume liters	2.15	4.35	9.2
Flange O.D. mm	171	234	285
Flange O.D. inches	6.75	9.25	11.25
Diameter mm	150	200	250
Diameter inches	5.91	7.87	9.84
Inside Height mm	135	175	225
Inside Height inches	5.31	6.89	8.86
Overall Height mm	190	230	300
Overall Height inches	7.48	9.06	11.81

Plate #	DL-256025	DL-256045	DL-256065
Plate Diameter mm	141	190	239
Fits Desiccator	243025	243045	243065