Description

Clarkson WE200
Yamato Pure Line Lab Water Purification System 115-240V
Yamato Scientific WE200 / Thomas 23A00R566

Yamato Pure Line WE200 Lab Water Purification System

Yamato’s Pure Line WE200 benchtop water purification system has an integrated reverse osmosis membrane cartridge to increase the life span of all consumables significantly. The standard equipped membrane filters additionally protect pure water production from contamination. It displays alerts for consumable replacements and keeps track of replacement history. The WE200 produces ASTM type 1 deionized water and is suitable for high sensitivity analysis.

Features

Suitable for high sensitivity trace analysis
Lower running cost
By adopting reverse osmosis (RO) membrane cartridge set, life span of consumables has been expanded significantly
Benchtop type, space saving
Easy water sampling by attaching to water faucet
Easy to operate digital display
Displays replacement of consumables and its exchange history
Standard equipped with membrane filter to protect pure water production from contamination
Electromagnetic valve equipped at sampling water port for leakage prevention
Universal power supply: works with 100-240VAC

Model	WE200
Purified Water	Deionized water: compliant with ASTM D 1193 Type1 / JIS K0557 A4
Water Purifying Method	RO membrane→ion exchange→filtration
Pure Water Delivery Rate	0.5~1.0L/min continuous production
Raw Water Filter	Pre-treatment cartridge (activated charcoal + 0.1μm hollow fiber membrane)
Filtration	Reverse osmosis membrane RO
Ion-Exchange Resin Cartridge	2L ion exchange resin containing activated charcoal (CPC-T)
Final Filtration	0.1μm membrane filter
Leakage Detection	Water supply solenoid valve forcibly shut off when leak is detected
Raw Water Press Range	0.13~0.5MPa (1.3~5.0kgf/cm²)
Raw Water Temperature Range	10~30°C
Water Sampling Port	250mm above floor, RC1/4 (connected with membrane filter)
Drainage Port	ø10 rigid tube
Drainage Rate	Maximum 2L/min.
Safety Device	Water cut-off error, water quality sensor error, controller error, pressure limit error, leak error, flow alarm/error, earth leakage circuit breaker
Power Source (50/60Hz)	Single phase AC100~240V 1.3A or less
External Dimensions (Mm)	W350 x D430 x H 470
Weight	~30kg
Water Quality Display	7-segment LED display (conductivity / resistivity / water temperature)
Other Display	Consumables replacement display (ion exchange resin, pre-treatment cartridge, reverse osmosis (RO) membrane, membrane filter), warning / error display
Included Accessories	Supply / drain water hoses, pre-treatment cartridge, reverse osmosis (RO) membrane cartridge set, membrane filter, power cord, seal tape
*This unit must be connected to drainage facility.